Connecting A Decoder For Scrambled Pay Tv Broadcasts - Samsung SV-647X Instruction Manual

Connecting a Decoder for scrambled PAY TV broadcasts

Aerial
TV
Aerial Connector
AV2 (DEC./EXT.)
OUT/SORTIE
2
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
SCART Cable
This VCR is fully equipped to receive scrambled Pay TV broadcasts.
Example: CANAL+ or Premiere broadcasts.
You can:
Record a scrambled programme while watching another channel
Record another channel while watching a scrambled programme
1 Connect the VCR to the television as indicated on page 9.
2 Plug the SCART cable with the decoder into the AV2 (DEC./EXT.) socket on the rear of the VCR.
3 Plug the other end into the decoder.
If you connect the DVD player into the AV2(DEC./EXT.) socket on the rear of the VCR, you have
to select normal video output in the video display menu of DVD player.
10
DECODER
AV1 (EURO AV)
3
SCART Cable
Connecting Your VCR to the Satellite receiver or Other Equipment
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
1. AV1 (EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
VCR.
After making this connection, select the source by pressing the INPUT button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,
e.g. re-adjust to channel 33.
Satellite Receiver or other Equipment
Aerial Connector
AV1 (EURO AV)
TV
1
AV2 (DEC./EXT.)
TV
AV1 (EURO AV)
SCART Cable
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of the
VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
Satellite Receiver or other Equipment
Aerial Connector
AV1 (EURO AV)
TV
1
AV2 (DEC./EXT.)
TV
AV1 (EURO AV)
SCART Cable
Antenne
2
OUT/SORTIE
R/D
AUDIO
L/G
Antenne
2
SCART Cable
OUT/SORTIE
R/D
AUDIO
L/G
11
GB