Configure Blf - Mitel 6867i Configuration Manual

details are username: admin and password: 22222.
Click on Configuration Server in the left navigation menu.
Enter Hostname or IP Address in the Primary Server field.
Example for Hostname: voip.bicomsystems.com
Example for IP Address: 192.168.1.10
Click on Save Settings button.
Click on Reset in the left navigation menu.
Click Restart button and confirm with OK on prompt.
You'll have to wait couple of seconds for the configuration to be updated.
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.

Configure BLF

This chapter describes how to configure BLF (Busy Lamp Field) for Mitel 6867i.
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login page. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
Edit extension.
On the Extensions page click on the edit icon corresponding to your extension.
Click on Advanced Options button.
Navigate down to the Auto Provisioning and Presence group of settings.
NOTE:
Do not power