Advertisement
Operational Modes and Program Codes
The WSSKP-1 can be used in one of three operating modes:
Standalone
Wiegand
Combined standalone/Wiegand
The following table indicates applicable Program Codes for each of the Operational Modes.
Program Codes / Code Options / Operation Modes Chart
Program
Program Code Options
Code
Code 0 –
0 =
Combination
Outputs
1 =
2 =
3 =
Code 1 –
26 = 26 bit Wiegand format
Wiegand
36 = Keyscan proprietary
Format
format (Default)
Code 2 –
0 to 255
Facility
0 (Default)
Code
Code 3 –
1 to 9999
Master Code
9571 (Default)
Code 5 –
0 = Switched Off – Normally
Digital
Open (Default)
Output
1 = Switched On – Normally
Status
Closed
Code 6 –
0 to 255 seconds
Digital
5 seconds (Default)
Output Time
Code 7 –
3 to 5 digits
Digit Length
5 digits (Default)
of PIN
WSSKP-1 Installation & Programming Guide
Wiegand and digital
output on valid PIN –
# key not required
after PIN entry
(Default)
Wiegand and digital
output on valid PIN -
# key required after
PIN entry
Wiegand or digital
output on valid PIN –
# key not required
after PIN entry
Wiegand or digital
output on valid PIN –
# key required after
PIN entry
Standalone
Wiegand
Operation
Operation
Combined
Operation
7
Hide quick links:
Advertisement
