Advertisement
Q.S. Plate Caster Leg Extender Kit
HARDWARE KIT QS-HWR0135
For easier installation, it is best to install the plate caster leg extenders while bench in upside down.
Note: If this kit is for an excising bench the leg extenders in that bench will have to be removed.
Slide the plate caster leg extender into the pedestal tube making sure the threaded holes on the plate caster
leg extender tube are on the same side as the holes in the pedestal tube. Align the threads of the leg
extender with the holes in the pedestal tube and select the desired height of the bench. Thread the 1/4-20 x
.75 HHW bolts with the 1/4 flat washers into the threaded holes, two per plate caster leg extender, and
tighten. Install a caster wheel per plate caster leg extender, using four 1/4-20 x 75 HH bolts and eight of the
1/4 flat washers with four 1/4-20 hex keps nuts then tighten.
15
Advertisement
