Advertisement
QS Electrical Strip
HARDWARE KIT QS-HWR047
Step 1
Attach the TE2 mounting brackets to the back side of the SEC Electrical Channel using the 1/4-20 x .50 self-
threading phillips screws being sure to fit the power cord through the large hole in the bracket. DO NOT
TIGHTEN these screws. From the backside of the bench carefully fit the SEC Electrical Channel over the top
of the worksurface while fitting the lower flange of the TE2 mounting brackets under the worksurface. Looking
under the worksurface align the slots in the TE2 mounting brackets with the inserts in the worksurface.
Thread the 1/4-20 x .75 hex head bolts into the inserts and while applying pressure to the backside of the
SEC Electrical Channel to force it against the back of the worksurface tighten the bolts. Next tighten the 1/4-
20 x .50 self-threading phillips screws.
Note: CAUTION: Risk of Electric Shock. Do NOT plug into another Relocatable power tap.
11
Advertisement
