Installing A Replacement Lcc - Dell EMC PowerStore T Installation And Service Manual

NOTE: The LCC comes completely out of the DAE chassis. In addition to holding the latches, be prepared to support
the LCC to avoid dropping it.
a) Locate the orange handle buttons on the LCC handles.
b) Press the orange handle buttons to release the LCC, pull the latches outward, and remove the LCC from its slot.
Figure 127. Removing an LCC
4. Place the LCC on a clean, static-free surface.

Installing a replacement LCC

Steps
1. Attach an ESD wristband to your wrist and the enclosure.
2. Pull out the latches on the LCC and make sure they stay in the open position.
1
2
CL5984
Expansion enclosure service procedures 89