Download Print this page
SuperATV FF-P-RAN900 Installation Instructions Manual

SuperATV FF-P-RAN900 Installation Instructions Manual

Fender flares for polaris ranger xp 900

Advertisement

Quick Links

2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427
Liability Statement
SuperATV's
products are designed to best fit user's ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty
®
provided by SuperATV
and is not recommended. SuperATV's
®
SuperATV
to verify that they will work together.
®
Although SuperATV
has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine
®
and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product's ability to protect user from severe injury or death. SuperATV
appropriate riding gear at all times.
By purchasing and installing SuperATV
parts, or freight charges. SuperATV
product purchased from SuperATV
product that gave rise to the claim.
SuperATV
will warranty only parts provided by SuperATV
®
by SuperATV
. SuperATV
parts and products are not warrantied if item was not installed properly, misused, or modified.
®
®
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary
depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle
safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to
hold SuperATV
harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all
®
applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV
violation thereof.
Need help with your installation?
sales@superatv.com
1-855-743-3427
© 2020 SuperATV.com
. All Rights Reserved.
®
products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact
®
products, user agrees that should damages occur, SuperATV
®
, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any
®
. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the
®
. Any damage or problems with OEM housings, bearings, seals, or other manufacturers' products will not be covered
®
www.superatv.com
8:00am - 8:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
INSTALLATION INSTRUCTIONS
Fender Flares:
will not be held responsible for loss of time, use, labor fees, replacement
®
Read instructions and view illustrations before beginning.
for Polaris Ranger
urges operators and occupants to wear a helmet and
®
Thank You
For Choosing
IN-FF-P-RAN900 3/16/2020
XP 900
®
harmless from any
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the FF-P-RAN900 and is the answer not in the manual?

Questions and answers

Summary of Contents for SuperATV FF-P-RAN900

  • Page 1 The Buyer is also responsible to obey all ® applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV harmless from any ®...
  • Page 2 Upper Left Rear Flare Upper Left Front Flare Lower Left Rear Flare Lower Left Front Flare Upper Right Rear Flare Upper Right Front Flare Lower Right Rear Flare Lower Right Front Flare IN-FF-P-RAN900...
  • Page 3 - Place Clip as close to curve as possible. - Mark hole location onto Lower Right Front Flare. - Remove Clip and drill hole through Lower Right Front Flare; use a Ø9/32” drill bit. - Install Clip over new hole. IN-FF-P-RAN900...
  • Page 4 Upper Right Front Flare - Temporarily join Upper and Lower Right Flares with Push Pin. Lower Right Front Flare - Mark hole location onto Upper Right Front Flare. - Drill hole through Upper Right Front Flare; use a Ø3/16” drill bit. IN-FF-P-RAN900...
  • Page 5 Upper Right Flare reuse (2) stock screws IN-FF-P-RAN900...
  • Page 6 - Secure Upper Right Front Flare to Lower Right Front Flare with hardware shown. M6 x 30mm - Secure Flares with hardware shown. M4 x 16mm IN-FF-P-RAN900...
  • Page 7 - Place Upper Right Front Flare against body and drill holes in locations shown; use a Ø5/16” drill bit. - Secure Upper Right Front Flare with hardware shown. 3x - Push Pin repeat steps for opposite side installation IN-FF-P-RAN900...
  • Page 8 Rear: driver side installation shown - Secure Lower Right Rear Flare with hardware shown. stock screw Push Pin - Place Upper Right Rear Flare onto Lower Right Rear Flare and align to machine. IN-FF-P-RAN900...
  • Page 9 - Secure Upper Right Rear Flare with hardware shown. 3x - M5 x 40mm 5x - Push Pin IN-FF-P-RAN900...