Safety And Instructional Decals; Installation - Toro TX Platform Installation Instructions Manual

Safety and Instructional
Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
1. Crushing hazard of hand—keep hands away.
1. Read the Operator's Manual.
2. Platform locked in the storage position.
3. Lift the platform up to unlock.

Installation

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
94-3353
Description
No parts required
Platform assembly
Bolt (1/2 x 1-1/2 inches)
Flange-head nut (1/2 inch)
Counterweight
Bolt (1/2 x 1-1/4 inches)
Washer
No parts required
Handle
Flange-head bolts (5/16 x 3/4 inch)
decal94-3353
1. Grease
112-2744
4. Lower the platform from the unlocked position to use.
5. Warning—read the Operator's Manual.
6. Tipping hazard—do not step off the platform with a raised
load.
Qty.
–
1
4
4
1
4
4
–
1
2
2
58-6520
Use
Prepare the traction unit.
Install the platform.
Install the counterweight (TX 500 series
traction units only).
Install the decal.
Install the handle.
decal58-6520
decal112-2744