Operation - Toro TX Platform Installation Instructions Manual

Operation

WARNING
If you step off of the platform with a heavy load
raised, the machine could tip forward quickly,
injuring your and/or pinning bystanders.
Do not step off of the platform with the load
raised.
WARNING
Unless you are carrying heavy loads or
attachments, the platform with an operator
will make the rear of the machine the heavy
end.
Always keep the heavy end of the machine
uphill when operating on slopes.
WARNING
You could fall off of the platform and be
seriously injured during operation.
Do not move the controls unless you are
standing with both feet on the platform and
your hands are holding the handles.
Folding/Unfolding the
Platform
To fold the platform, lift up on the back of it and swing
it towards the traction unit
contacts the mounting plate, the platform will slide
down into the tube and will lock in place.
(Figure 10). When the latch
1. Handle
To unfold the platform, pull up on it until the latch
releases and then swing it out and down
Using the Platform
To use the platform, step onto it before starting the
machine. Fully stop the machine and apply the
parking brake before getting off of the platform. Use
the reference bar and handle to stabilize yourself
while riding on the platform.
8
Figure 10
(Figure
Figure 11
g004405
11).
g004406