Cleaning The Inlet Filter - Triton Ivory 2 Installation And Operating Instructions Manual

Servicing
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY

Cleaning the inlet filter

Fig.43
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by a competent person.
SWITCH OFF THE ELECTRICITY SUPPLY AT THE
MAINS.
Remove the cover. The inlet filter is situated in
the inlet pipe which is part of the solenoid valve
(fig.43).
To gain access to the filter will require the
Filter
trimplate to be removed and disconnecting and
removal of the compression fitting. Also,
depending on the incoming pipework
arrangements, if there is not enough slack in the
pipework, it could mean the removal of the unit
from the wall.
When cleaning the filter, DO NOT use a sharp
object, as it will cause damage. It is preferable to
use an old toothbrush or similar.
When the filter is clean, recommission the unit.
20