Section O: Recorder Set-Up - Sony ICD-MS515 Resource Manual

SECTION N: PC Requirements and Compatibility
PC Connected Models: ICD-P17, ICD-ST10, ICD-ST10VTP, ICD-MS515,
IBM PC/AT or compatible
Operating Systems: Microsoft Windows® 98, 2000,ME, XP
CPU: 266MHz Pentium® II processor or higher
RAM: 64 MB or more
Hard Disk Space: 70 MB or more
CD-ROM Drive
USB Port
Sound Board
Display: High Color (16 bit) or more and 800 x 480 dots or more

SECTION O: Recorder Set-Up

In order to obtain the best results from your digital voice recorder it's important to take
the time set up the device properly. It only takes a few minutes and you're ready to start
dictating. Sony makes it very easy to accomplish most of these settings by uploading
settings from the PC. Just connect the USB cable to the PC connectable units. Launch
the digital voice editor and click on the IC Recorder Setting icon on the Tool Bar.
The only setting that is not handled in this process with USB connection is the date and
time which has to be done on the recorder.
For non-PC connected units press the MENU button. You can also set up the PC
connected units in the same way rather than using the Digital Voice Editor Software.
The various settings include:
Author Name: identifies the recorder by becoming part of the file name
which is transferred to the PC.
Beep Tone: On or Off
Continuous: when ON, in playback will continue to play continuously
through the recordings one after the other without stopping at the end of
each one.
When OFF, the playback will stop at the end of each recording.
Counter: shows the amount of time you are recording or playing
Date and Time: enter the current date and time
ICD-MS515VTP
IC RECORDER SETTING Icon
35