Sony ICD-MS515 Resource Manual page 30

If using the Sony FS-85USB Transcription Hardware / Software kit, there is no need to
convert the files from the format of dictation created on a Sony digital Voice Recorder.
No matter which file format, .msv or .dvf, the software allows it to be listened to without
conversion.
In order to allow dictation recorded on the digital voice recorders to be transcribed by
other transcription softwares it may be necessary to convert the files to a .wav format.
This can easily be done by converting the file format to .wav using the Sony Digital Voice
Editor software. When saving a digital voice recorder message on your computer's hard
disk, you can specify any one of the file formats mentioned above.
To Convert and Save All Recordings from the Digital Voice Recorder on the PC
Click on the IC RECORDER icon on the Tool Bar
In the Drop Down box Select WHOLE then select SAVE
In the "Save All Message" box which appears
Choose the "Save-In location"
Re-Name the Folder (only if you want to)
Choose "Save as type"
Click on "Save"
To Convert and Save All Recordings from a specific File Folder on the Digital Voice
Recorder to the PC
In the Recorder File Folder section of the GUI (Graphical Unit Interface)
click on the specific file folder
Right Click on the mouse and select "Save"
In the "Save Message" box which appears
Choose the "Save-In location"
Re-Name the Folder (only if you want to)
Choose "Save as type"
Click on "Save"
To Convert and Save one recording in a specific file folder on the Digital Voice Recorder
to the PC
In the Recorder File Folder section of the GUI (Graphical Unit Interface)
click on the specific file folder
In the Folder Content Information Section of the GUI left click on the dictation
you wish to convert and save (it will be highlighted)
Right Click on the mouse and select "Save"
In the "Save Message" box which appears
Choose the "Save-In location"
Re-Name the Folder (only if you want to)
Choose "Save as type"
Click on "Save"
30