Advertisement
NOTE: The MWI port within
the MWI Port Group it's used
by the MWI sub-system to
control concurrent MWI
requests. This does not
affect incoming/outgoing
traffic to the port in anyway.
AVAYA E1/QSIG
Next access the Port Groups tab under the MAS name
1. Click Add Group button
2. Name Group MWI
3. Within the new MWI Port Group uncheck all Ports except the MWI
port. This will be the upper most port of the trunk group. Port 29
on a single board or Port 59 if 2 boards (see side NOTE). This port
can receive calls, so ensure it is programmed for both Incoming
and Outgoing under the Port Group Usage
4. Return to the Port Groups General tab and ensure the Default
Group under Port Groups is configured to meet the customer's
need for Incoming and Outgoing under Port Group Usage.
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
23
Advertisement
