Installation
Axles, Planetaries and Brakes: Service and Repairs
2
g276524
1.
Axle shaft seal
2.
Axle cover
1. Coat new axle shaft seal with grease and install in axle cover as shown
(Figure
259).
2. Press the axle cover and bearing assembly onto the axle shaft. Press only
on the inner race of the cover bearing
3. Install retaining ring, spacer and correct combination of bearing shims. Install
bevel gear and bearing.
4. Coat a new O-ring with grease and install the axle cover assembly. Tighten
axle cover screws from 23 to 27 N·m (17 to 20 ft-lb).
1
4
3
Figure 259
3.
Bearing
4.
Axle shaft
(Figure
Page 7–32
259).
Groundsmaster
®
4500-D/4700-D
19245SL Rev A