TRENDnet TW100-BRF114U User Manual page 43

Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
Buttons
Connection Details
System Data
Restart
Refresh Screen
This indicates the current connection method, as set in the Setup
Wizard.
This shows the connection status of the modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider).
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the Broadband Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and the
IP addresses allocated to them, use the PC Database option on
the Advanced menu.
This displays the current name of the TW100-BRF114U.
The current version of the firmware installed in the TW100-
BRF114U.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the TW100-BRF114U.
All existing connections though the TW100-BRF114U will be
terminated, but will usually re-connect automatically.
Update the data displayed on screen.
Operation and Status
39