TRENDnet TW100-BRF114U User Manual page 22

Cable/dsl 4-port firewall router with usb print server

Hide thumbs Also See for TW100-BRF114U:

Table of Contents

Broadband Router User Guide

Checking TCP/IP Settings - Windows 9x/ME:

1. Select Control Panel - Network. You should see a screen like the following:

Figure 9: Network Configuration

2. Select the TCP/IP protocol for your network card.

3. Click on the Properties button. You should then see a screen like the following.

Figure 10: IP Address (Win 95)

Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. Using this is recommended. By default, the TW100-BRF114U will act as a

DHCP Server.

Restart your PC to ensure it obtains an IP Address from the TW100-BRF114U.

Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the

following changes:

Table of Contents