TRENDnet TW100-BRF114U User Manual page 14

Broadband Router User Guide
If you can't connect
If the TW100-BRF114U does not respond, check the following:
•
The TW100-BRF114U is properly installed, LAN connection is OK, and it is
powered ON. You can test the connection by using the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the TW100-BRF114U 's IP Ad-
dress. (See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.0.2 to 192.168.0.254 to be compatible with the TW100-BRF114U's
default IP Address of 192.168.0.1. Also, the Network Mask must be set to
255.255.255.0. See Chapter 4 - PC Configuration for details on checking your
PC's TCP/IP settings.
•
Ensure that your PC and the TW100-BRF114U are on the same network
segment. (If you don't have a router, this must be the case.)
10