TRENDnet TW100-BRF114U User Manual page 29

Cable/dsl 4-port firewall router with usb print server

Hide thumbs Also See for TW100-BRF114U:

Table of Contents

5. Ensure your TCP/IP settings are correct, as described below.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. Using this is recommended. By default, the Broadband Router will act as a

DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Broadband Router.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the

following changes.

•

Enter the TW100-BRF114U 's IP address in the Default gateway field and click OK.

(Your LAN administrator can advise you of the IP Address they assigned to the TW100-

BRF114U.)

•

If the DNS Server fields are empty, select Use the following DNS server addresses, and

enter the DNS address or addresses provided by your ISP, then click OK.

Figure 18: TCP/IP Properties (Win 2000)

PC Configuration

Table of Contents