Toyota Highlander 2020 Quick Reference Manual page 47

CHANGING PRE-COLLISION ALERT TIMING
(1) Press " " or "
(MID).
(2) Press " " or "
(3) Press " " or "
" to select the desired setting. Each time it is pressed, the response to the PCS
"
alert timing changes as shown above.
(4) Press " " to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press " " or "
Display (MID).
(2) Press " " or "
(3) Press " " or "
select the desired setting.
(4) Press " " to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON mode.
Refer to the Toyota Owner's Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Far
" switches and select "
" switches and select "
" switches and select "Sensitivity" and then press and hold
" switches and select "
" switches and select "
" switches and select "PCS on/off" and then press "
Middle
(default)
" from the Multi-Information Display
PCS" and then press and hold "
" from the Multi-Information
PCS" and then press and hold "
45
Near
."
."
" to