Toyota Highlander 2020 Quick Reference Manual page 19

Power Liftgate (back door) (
Instrument panel
Power Liftgate (back door)
(open only)
Hands-Free, Foot-Activated Power Liftgate
(if equipped)
Kick sensor
To automatically open/close Power Liftgate Quickly swipe your foot near the
lower center part of the rear bumper for within 1 second to trigger sensor. To
operate, make sure that the touchless sensor operation is enabled and that you are
carrying the remote.
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
PROGRAMMABLE POWER LIFTGATE
1. When the liftgate reaches the desired height, push the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds (4 times).
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until it buzzes, and continue to hold until it buzzes
again -then let go. Push the same button to close the liftgate. When you next
open the liftgate, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press "
switches and select "
then press " ." Select Opening Adjustment, then press "
position (5 height options to choose from,) then press "
Refer to the Owner's Manual for limitations and more details on this system.
(close only)
" from the MID. Press "
17
)
if equipped
Open: Push and hold
Close: Push and hold again
Carry Smart
Key remote
Sensor area
" meter control
" and select
." Select desired
."
and