Wireless Screen
The TEW-435BRM's settings must match the other Wireless stations.
Note that the TEW-435BRM will automatically accept both 802.11b and 802.11g connections,
and no configuration is required for this feature.
To change the TEW-435BRM's default settings for the Wireless Access Point feature, use the
Wireless link on the main menu to reach the Wireless screen. An example screen is shown
below.
Data - Wireless Screen
Identification
Regulatory
Domain
Station name
SSID
(ESSID)
Figure 7: Wireless Screen
Select the correct domain for your location. It is your responsibility to
ensure:
•
That the TEW-435BRM is only used in domains for which is
licensed.
•
That you select the correct domain, so that only the legal channels
for that domain can be selected.
This is the same as the "Device Name" for the TEW-435BRM.
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.
Setup
15