TRENDnet TEW-435BRM User Manual page 51

Wireless ADSL Router User Guide
WAN Users
Log
These settings determine which packets are covered by the rule, based
on their source (WAN) IP address. Select the desired option:
•
Any - All IP addresses are covered by this rule.
•
Address range - If this option is selected, you must enter the "Start"
and "Finish" fields.
•
Single address - Enter the required address in the "Single/Start"
fields.
This determines whether packets covered by this rule are logged. Select
the desired action.
•
Always - always log traffic considered by this rule, whether it
matches or not. (This is useful when debugging your rules.)
•
Never - never log traffic considered by this rule, whether it matches
or not.
•
Match - Log traffic only it matches this rule. (The action is deter-
mined by this rule.)
•
Not Match - Log traffic which is considered by this rule, but does
not match (The action is NOT determined by this rule.)
48