Wireless ADSL Router User Guide
Destination IP Address
Network Mask
Gateway IP Address
Metric
Other Routers on the Local LAN
Other routers on the local LAN must use the TEW-435BRM's Local Router as the Default
Route. The entries will be the same as the TEW-435BRM's local router, with the exception of
the Gateway IP Address.
•
For a router with a direct connection to the TEW-435BRM's local Router, the Gateway IP
Address is the address of the TEW-435BRM's local router.
•
For routers which must forward packets to another router before reaching the TEW-
435BRM's local router, the Gateway IP Address is the address of the intermediate router.
Static Routing - Example
For the TEW-435BRM's Routing Table
For the LAN shown above, with 2 routers and 3 LAN segments, the TEW-435BRM requires 2
entries as follows.
Entry 1 (Segment 1)
Destination IP Address
Network Mask
Gateway IP Address
Metric
Entry 2 (Segment 2)
Destination IP Address
Network Mask
Normally 0.0.0.0, but check your router documentation.
Normally 0.0.0.0, but check your router documentation.
The IP Address of the TEW-435BRM.
1
Figure 47: Routing Example
192.168.1.0
255.255.255.0 (Standard Class C)
192.168.0.100 (TEW-435BRM's local Router)
2
192.168.2.0
255.255.255.0 (Standard Class C)
TEW-435BRM
70