TRENDnet TEW-435BRM User Manual page 30

802.11g wireless adsl router, 802.11g/802.11b wireless access point, adsl modem, nat router, 4-port switching hub

Hide thumbs Also See for TEW-435BRM:

Table of Contents

5. Ensure your TCP/IP settings are correct, as described below.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. Using this is recommended. By default, the TEW-435BRM will act as a

DHCP Server.

Restart your PC to ensure it obtains an IP Address from the TEW-435BRM.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the

following changes.

•

Enter the TEW-435BRM's IP address in the Default gateway field and click OK. (Your

LAN administrator can advise you of the IP Address they assigned to the TEW-435BRM.)

•

If the DNS Server fields are empty, select Use the following DNS server addresses, and

enter the DNS address or addresses provided by your ISP, then click OK.

Figure 20: TCP/IP Properties (Win 2000)

PC Configuration

Table of Contents