Chapter 2 Installation; Requirements; Procedure - TRENDnet TEW-435BRM User Manual

802.11g wireless adsl router, 802.11g/802.11b wireless access point, adsl modem, nat router, 4-port switching hub

Hide thumbs Also See for TEW-435BRM:

Table of Contents

Chapter 2

Installation

This Chapter covers the physical installation of the TEW-435BRM.

•

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

•

TCP/IP protocol must be installed on all PCs.

•

For Internet Access, an Internet Access account with an ISP, and a DSL connection.

•

To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE

802.11g or IEEE 802.11b specifications.

1. Choose an Installation Site

Select a suitable place on the network to install the TEW-435BRM.

For best Wireless reception and performance, the TEW-

435BRM should be positioned in a central location with

minimum obstructions between the TEW-435BRM and the

PCs.

Also, if using multiple Access Points, adjacent Access

Points should use different Channels.

Figure 4: Installation Diagram

Table of Contents