TRENDnet TEW-435BRM User Manual page 37

Wireless ADSL Router User Guide
Data - Status Screen
ADSL
Modem Status
DownStream
Connection Speed
UpStream
Connection Speed
DSL Multiplexing
Method
VPI
VCI
Internet
Connection Method
Connection Status
Internet IP Address
Connection Details
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
Name (SSID)
Region
This indicates the status of the ADSL modem component.
Displays the speed for the DownStream Connection.
Displays the speed for the UpStream Connection.
Indicates the current DSL Multiplexing method (LLC-Based or
VC-Based)
Indicates the current VPI setting for the DSL connection
Indicates the current VCI setting for the DSL connection
Displays the current connection method.
This indicates the current status of the Internet Connection.
•
Active - Connection exists
•
Idle - No current connection, but no error has been detected.
This condition normally arises when an idle connection is
automatically terminated.
•
Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the connec-
tion to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider). If using a dynamic IP address, and no connection currently
exists, this information is unavailable.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
The IP Address of the TEW-435BRM.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
This shows the MAC Address for the TEW-435BRM, as seen on
the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identi-
fier).
The current region, as set on the Wireless screen.
34