Start up the IDPA
You can start the IDPA from the Dell server through iDRAC.
Start up the IDPA from Dell server
About this task
Switch on the power button on the Dell server.
Start up the IDPA from iDRAC
Procedure
1. Turn on the iDRAC and log in to iDRAC from its UI using
2. Click the Power On System button.
3. Connect to the ACM by accessing the https://<ACM_IP>:8543 URL from the browser.
Note:
The ACM will be accessible within approximately 20 minutes.
Dell EMC Integrated Data Protection Appliance DP4400 Service Procedures
Remove and replace assemblies
user and iDRAC password.
root
83