Nms Interconnection Commissioning; Commissioning The Outband Nms - Huawei UA5000 Commissioning Manual

UA5000 Universal Access Unit Product
Commissioning Guide-PVM CLI

4.1 NMS Interconnection Commissioning

The administrator can maintain and manage the UA5000 in inband network management or
outband network management mode. This topic describes how to commission the
interconnection by considering the "iManager U2000 unified network management
system" (iManager U2000) as an example.

4.1.1 Commissioning the Outband NMS

This topic describes how to verify that the UA5000 can support the outband NMS through the
local maintenance network port (the outband NMS interface), so that the iManager U2000 can
maintain the device through this management channel.
Networking
Figure 4-1
control board in the UA5000 through the IP network.
Figure 4-1 Networking for the outband NMS
COM
Issue 04 (2012-06-25)
shows that the iManager U2000 connects to the outband NMS interface of the PVMB
Router
PVMB
ETH0
ETH1
UA5000
NOTE
l When the control board is PVMB, the iManager U2000 connects to the ETH0 maintenance network
port of the PVMB control board through the IP network in the independent upstream mode. The
iManager U2000 connects to the ETH1 service network port of the PVMB control board through the
IP network in the integrated upstream mode.
l When the control board is PVMD, the iManager U2000 connects to the ETH maintenance network
port of the active PVMD control board through the IP network in the independent upstream or the
integrated upstream mode.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the Interconnection
iManager U2000
94