Onespace 50-JN22DSK Assembly Instructions

Industrial desk, inset black metal

ASSEMBLY INSTRUCTIONS

INDUSTRIAL DESK, INSET BLACK METAL

CUSTOMER SERVICE

o F

f r

s a

e t

t s

e s

i v r

e c

i a l

, s

e r

t s

f s

r o

e r

a l

e c

t n

r a

, s t

or questions, please visit our website.

Keep your sales receipt as documentation of your ownership.

Table of Contents

Need help?

Do you have a question about the 50-JN22DSK and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS INDUSTRIAL DESK, INSET BLACK METAL CUSTOMER SERVICE i v r i a l , s t or questions, please visit our website. Keep your sales receipt as documentation of your ownership.
Page 2 PARTS LIST Please look for part indicator on the side of the part. It is either stamped or on a labled sticker. Tabletop Middle Tabletop End (x2) Support Bar (x2) Leg (x2) Rail (x2)
Page 3 ASSEMLBY Attach the Support Rails (D) to the Legs (C) using four 6x14mm Screws (1) (NOTE: These are the shortest screws). Then secure the Support Rails together using a 6x20mm Screw (6) and Nut (2) in the center. TIP: It may be easier to complete this step with the front edge of the legs (indicated by the arrows) resting on the oor.
Page 4 Leg assembly using twelve 6x30mm Screws and Washers (Note: Washers go between the Rails and the Tabletop pieces). TIP: Start with the outermost screws on each rail. Once those are in place, work your way inwards. This will help align the rest of the screws.
Page 5 • DO NOT stand on the table. Do not use the table as a stepladder. • table • Every 6 months, check all bolts and screws to ensure they are tight. • This products is California 93120 Compliant for Formaldehyde. PLEASE VISIT OUR WEBSITE FOR WARRANTY INFORMATION We warrant this product to be free from defects in material and workmanship for one (1) year.