Deregister The Conference Phone - Snom C620 Quick Installation Manual

Cancel
6� Press
The conference phone displays the following messages:
Yes
7� Press
The conference phone displays the following message:
8� On the base station, press and hold the LINK key for 4 seconds�
Both LEDs on the base station begin to flash�
9� Press the # key on the conference phone to begin registration�
The conference phone displays the message "Registering��� please wait�"
When registration is complete, the conference phone beeps and then displays
"Speaker Registered�"
If the conference phone fails to register, remove it from the charger for a few
seconds, replace it in the charger, and repeat the registration procedure�

Deregister the conference phone

1� Press (MENU)�
2� Select Status & Settings > User Settings > Registration�
3� Select Deregistration�
4� Select the <device name> of the conference phone�
For example, "SPEAKERBOX
5� Enter the PIN� Default PIN is 1590�
If deregistration is successful, the conference phone displays a message�
For example, "SPEAKER BOX 1 is deregistered�"
�
�
1"�
9