Hydromassage Menu - Jacuzzi J-400 Series Installation Manual And Use & Maintenance

I
Adjusting the Balance Audio Setting
Use the Quad Keypad to adjust the range from 10L to 10R.
Balance
Left Right
Press for
next Audio Settings
- press the Left button to adjust the balance from the right
side to the left side (10L).
- press the Right button to adjust the balance from the left
side to the right side (10R).
- press the Splash button to continue to the next Audio Set-
ting Menu or button (D) to return to the Choose Media Device
Menu.
I
Adjusting the Fader Audio Setting
Use the Quad Keypad to adjust the range from 10F to 10R.
Fader
Rear Front
Press for
next Audio Settings
- press the Left button to adjust the fade setting from the front
to the rear (10R).
- press the Right button to adjust the fade setting from the
rear to the front (10F).
- press button (D) to return to the Choose Media Device Menu
or the Splash button to return to the Bass Setting Menu.
I
Rock Audio Setting
From the Audio Settings Menu, press button (A) to activate the
rock audio settings. The settings are preset and non-adjustable.
Rock
Bass 3
Treble 1
Programmed audio settings are Bass (+3) and Treble (+1). If this
audio setting is selected do not press any button and in 15 sec-
onds the display will return to the Choose Media Device Menu.
- press button (B) to select the Classic Setting.
- press button (C) to select the Pop Setting.
- press button (D) to return to the Bass Setting Menu.
I
Classic Audio Setting
From the Audio Settings Menu press button (B) to activate the clas-
sical audio settings. The settings are preset and non-adjustable.
Classic
Bass 1
Treble 1
Programmed audio settings are Bass (+1) and Treble (+1).
If this audio setting is selected do not press any button and in
15 seconds the display will return to the Choose Media Device
Menu.
- press button (A) to select the Rock Setting.
- press button (C) to select the Pop Setting.
- press button (D) to return to the Bass Setting Menu.
I
Pop Audio Setting
From the Audio Settings Menu press button (C) to activate the
pop audio settings. The settings are preset and non-adjustable.
Pop
Bass -2
Treble -1
Programmed audio settings are Bass (-2) and Treble (-1).
If this audio setting is selected do not press any button and in
15 seconds the display will return to the Choose Media Device
Menu.
- press button (A) to select the Rock Setting.
- press button (B) to select the Classic Setting.
- press button (D) to return to the Bass Setting Menu.

Hydromassage menu

From main menu (see chap.. concerned) press key B to dis-
play the menu relative to the hydromassage:
A
B
Note: Once you enter the Jets Pump Submenu, all the pumps
will activate. You can turn off all or individual jets pump by
pressing the Splash button or the button next to the jets pump.
press the key located alongside this symbol to acti-
vate/deactivate pump 1.
press the key located alongside this symbol to acti-
vate/deactivate pump 2 (if applicable)
54
2
1
JETS
Jet 1
Jet 2
Jet 3
Press to
3 turn All Off
C
D