Eco Design Declaration; Installation - KitchenAid KOASP60600 Instructions For Use Manual

ECO DESIGN DECLARATION

This Appliance meets the eco design requirements
of European regulations no. 65/2014, and no.
66/2014 in conformity with European standard EN
60350-1.

Installation

GENERAL RECOMMENDATIONS
The oven is programmed to operate with power
absorption above 2.5 kW (indicated by "HIGH" in
the settings, as shown in the figure below) which
is compatible with a domestic power supply
above 3 kW. If the household has a lower power
supply, the setting must be lowered ("LOW"
in the settings). The table below details the
recommended electrical power settings for the
various countries.
COUNTRY
GERMANY
SPAIN
FINLAND
FRANCE
ITALY
NETHERLANDS
NORWAY
SWEDEN
U.K.
BELGIUM
1. To lower the power absorption setting, turn
the "Functions" knob to "SETTINGS" and select.
2. Confirm with button
3. Select "power" on the menu
4. Confirm with button
5. Select "LOW"
6. Press button ; a message appears on the
display confirming your selection.
7.
Traditional
Appliance and display settings
Appliance and display settings
ELECTRICAL POWER
SETTING
HIGH
LOW
HIGH
HIGH
LOW
HIGH
HIGH
HIGH
LOW
HIGH
Cleaning
Settings
Language
Power
Time
Over 2.5 kW
Before use:
• Remove any protective pieces of cardboard,
protective film and adhesive labels from the
oven and the accessories.
• Remove the accessories from the oven
and heat it at 200 °C for about one hour
to eliminate the smell and fumes from the
protective grease and insulating materials.
During use:
• Do not place heavy objects on the door as
they could damage it.
• Do not cling to the door or hang anything
from the handle.
• Do not cover the inside of the oven with
aluminium foil.
• Do not pour water into the inside of a hot
oven; this could damage the enamel coating.
• Do not drag pots or pans across the bottom
of the oven as this could damage the enamel
coating.
• Make sure that the electrical cables of other
appliances do not touch hot parts of the oven
or become trapped in the door.
• Do not expose the oven to atmospheric
agents.
After use:
• Allow the Artisan accessory to cool down
before removing it if cleaning is required.
When the Artisan accessory is removed from
the oven, ensure that the cap supplied is used
to prevent dirt entering the electrical socket.
7
High
Low