Aqua-Hot 400 Series Service Manual page 53

Step 4: Reconnect the Propane-Burner to the Propane-Burner Controller
1. Connect the propane burner harness to the
propane burner controller and buck boost con-
verters. Remember to attach the 3 separate
wires, previously disconnected from the pro-
pane burner controller.
A. Wire # 86 connects to the PWR terminal.
B. Wire # 92 connects to the BLO terminal.
C. Wire # 82 connects to the HSI+ Terminal
Figure 48
Instructions for Reattaching the Propane-Burner
2. Press firmly on connectors to secure them to the
Propane Burner Controller. Secure the Buck
Boost Converter plugs by screwing in the set
screws, previously loosened.
Figure 49
© Aqua-Hot® AHE-400-P01 Service Manual Rev.B June 2014
Section #: Title
Propane-Burner
p.
53