Reattaching The Propane-Burner - Aqua-Hot 400 Series Service Manual

Step 1: Replace the Mounting Gasket
1. Clean the old Gasket off the Combustion Chamber
and Boiler Tank's front plate.
Figure 42
Combustion
Chamber Without
Mounting Gasket
Step 2: Reinstall the Propane-Burner
1. Align the Propane-Burner's front air-tube plate
with the combustion chamber and slide onto
the bolts protruding from the boiler tank.
Figure 44
Instructions for Reattaching the Propane-Burner
2. Install new mounting gaskets and reinstall the
Combustion Chamber.
Figure 43
2. Finger tighten all four nuts previously removed
to secure the Propane-Burner to the boiler tank.
Figure 45
© Aqua-Hot® AHE-400-P01 Service Manual Rev.B June 2014
Section #: Title
Propane-Burner
p.
51