Exhaust System Requirements - Aqua-Hot 400 Series Service Manual

Hide thumbs Also See for 400 Series:
Table of Contents

Advertisement

The Aqua-Hot's exhaust is hot and must be kept away from
any heat-sensitive material; therefore, the exhaust system
should be checked to ensure that it continues to meet the
following requirements:
The exhaust must not be directed downward as a fire
could result when parked in dry, grassy areas.
The exhaust must not terminate underneath the vehi-
cle, underneath an open-able window or vent, in the
awning area of the motor home (if applicable), or near
slide-out areas.
Figure 7
The exhaust must be able to freely exit away from the
vehicle without any obstructions.
Use standard Two-inch automotive-type exhaust piping
and avoid bends if possible.
The 3-inch and 4-inch black-pipe nipples and the ex-
haust elbow, originally supplied with the Aqua-Hot,
must be used.
The exhaust tip must be used to prevent burner from
extinguishing in winds up to 40 mph.
#8, 3/8"
Exhaust Tip
© Aqua-Hot® AHE-400-P01 Service Manual Rev.B June 2014
Section #: Title

Exhaust System Requirements

Aqua Hot's
Exhaust
Pipe
#8, 3/8"
p.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ahe-400-p01

Table of Contents