Aqua-Hot 400 Series Service Manual page 49

Step 4: Remove the gas line from the Propane-Burner
1. Locate the gas valve assembly on the Propane
-Burner and the corresponding gas lines.
Figure 38
Gas line connection
Instructions for Detaching the Propane-Burner
Be sure to turn off the Propane Gas Sup-
ply at the port on top of the Aqua-Hot prior
to beginning this
procedure.
© Aqua-Hot® AHE-400-P01 Service Manual Rev.B June 2014
Propane-Burner
2. Using an 11/16 wrench, loosen the nut securing
the gas line to the gas valve assembly. If gas is
detected retighten nut and verify gas valve has
been turned to the "Off" position
Section #: Title
Close supply
ball valve before
removing burner
p.
49