Toro Spray Master Series Operator's Manual page 63

Note:
The positive battery cable is wired to the
starter or solenoid.
Figure 84
1. Positive (+) cable on the discharged battery
2. Positive (+) cable on booster battery
3. Negative (–) cable on the booster battery
4. Negative (–) cable on the engine block
5. Booster battery
6. Discharged battery
7. Engine block
4. Connect the other positive (+) cable clamp (red)
to the positive terminal of the booster battery.
5. Connect the negative (–) cable clamp (black) to
the negative terminal of the booster battery.
6. Connect the other negative (–) cable clamp
(black) to the engine block of the stalled machine
and away from the discharged battery.
Important:
Do not connect the negative (–)
cable clamp (black) to the negative battery
post of the discharged battery.
7. Stand away from the discharged battery of the
machine.
8. Start the machine and remove the cables in
the reverse order of connection, disconnect the
engine block connection first.
g012785
63