Bluetooth® Serial Connection; Near Field Communication (Nfc); Read Nfc Tags - Datalogic MEMOR 20 User Manual

BLUETOOTH® SERIAL CONNECTION
The Memor 20 can communicate with a Bluetooth® device, such as a printer, within a
range of 10 m, using the on-board Bluetooth® module.

NEAR FIELD COMMUNICATION (NFC)

NFC technology allows short-range, wireless data transfer between the terminal and
NFC tags or other NFC enabled devices placed in close proximity to the back of the ter-
minal.
Memor 20 support the following modes of operation:
•
•
•

Read NFC Tags

1. Make sure NFC is enabled (see "
2. Hold the NFC tag close to the back of the terminal.
3. When an NFC tag is recognized, the terminal emits a sound and the tag data dis-
NOTE: Area coverage and Bluetooth® radio performance may vary, due to
environmental conditions or interference caused by other devices (micro-
wave ovens, radio transmitters, etc.).
NFC tag reader/writer mode: the terminal reads and/or writes digital information
from or to an NFC tag.
Peer-to-Peer (P2P) mode: the terminal uses Android Beam and/or Bluetooth@
technology to transfer screen content (e.g., a picture, web page url, or file)
between NFC enabled devices.
NFC card emulation mode - The terminal emulates an NFC card (smart card) that
an external card reader can access.
plays on the terminal screen.
NOTE: Suspend mode and the screen lock temporarily turns the NFC radio
off.
).
NFC" on page 51
CONTENTS
79
USER'S MANUAL