CONTENTS
Images
Tap
Normal Image
and/or
Decoded Image
to change the SoftSpot images. You have six
options: three default images and three custom images.
Display Decoded Image For
Sets the duration of the decoded image.
Enable Continuous Scan on Double Tap
To enable the Continuous Scan mode and scan barcodes consecutively, switch right and
then double-tap the SoftSpot. Tap one more time to stop laser emission.
Continuous Delay
Allows to set the continuous delay time.
You can also configure the SoftSpot from the DXU. For more details on DXU, see "Desk-
top Configuration Utility (DXU)" on page 66.
69
USER'S MANUAL