Usb Dock Connection - Datalogic MEMOR 20 User Manual

USB Dock Connection

1. Turn on the host computer.
2. Connect the single slot dock full to the power supply (available as an accessory, p/
3. Connect the single slot dock full to the host computer by means of a standard USB
4. Remove the cap from the pogo pins on the dock.
5. Remove the USB rubber cap from the Memor 20
6. Insert the USB/ethernet plug included in the Memor 20's box and fasten it with
7. Turn on the Memor 20.
8. Insert the Memor 20 into the dock.
n 94ACC0249).
Type-C cable.
the two provided screws.
Host Computer
NOTE: Connection through the single slot dock full complies to USB 2.0
standard.
Memor 20
USB Type-C Cable
CONTENTS
Single Slot
Dock Full
Power Supply
(P/N 94ACC0250)
75
USER'S MANUAL