Connecting To A Computer - Transcend StoreJetTM 25P User Manual

Connecting to a Computer︱
If you want to use the StoreJet 25 as an external hard drive to upload/download data to and from
your computer, you will need to connect it to a USB port on the computer using the provided USB
Y-cable.
1.
Plug the small end of the USB Y-cable into the Mini USB port on the StoreJet 25.
2.
Plug the large end of the cable into an available USB port on your desktop, or notebook
computer.
*On some older computers, the power supplied by the USB port is below the required 5V DC
power. In this instance, please connect the spare large connector on the provided USB
Y-cable to a second USB port on the computer. This will provide the additional power
necessary to run the drive.
Figure 2: Mini USB to Standard-A USB cable (USB Y-cable)
Figure 3: Connecting to a Computer
9