Kyocera PF-510 Service Manual page 40

3K8/3K9
24. Remove the wires from the six clamps.
25. Remove the screw and then remove the
side duct cover.
26. Remove the connector.
27. Remove the screw.
28. Remove the thermistor spring and PF ther-
mistor 1.
Caution:
When mounting PF thermistor 1 again,
ensure that the temperature detection sec-
tion keeps securely in contact with PF warm
air fan heater 1.
1-4-10
Clamps
Figure 1-4-18
Screw
Figure 1-4-19
Screw
Thermistor spring
PF thermistor 1
Figure 1-4-20
Wires
Clamps
Clamps
Side duct cover
PF warm air fan heater 1
Connector