Hans Grohe PuraVida 15775 Series Instructions For Use/Assembly Instructions page 75

Thermostatic Adjustment
Temperature Limitation
The temperature is limited by the safety stop to 40°C. If
a higher temperature is required, it is possible to over ride
the safety stop by depressing the safety button.
NB. It is recommended that for private domestic
use the maximum mixed water temperature be set at the
following factory set values:
Shower Mixer 43°C
Bath/Shower 43°C
Temperatures can be set by following the procedures
on pages 62 and 63. This ensures that after correct
installation the outlet temperature of the water can never
exceed 43°C.
To guarantee a smooth running of the thermostatic element,
it is necessary from time to time to turn the thermostat from
total hot to total cold. The thermostatic mixer valve should
be checked annually by a qualified person to ensure
correct operation.
The mixer is fitted with check valves (pages 68 and
69 pos. 94074000) and filters (pages 68 and 69 pos
94282000). If the water flow drops the filters need to be
cleaned. For that purpose please follow the steps 1 - 12
on pages 64 and 65.
Calibrating Thermostat
If the temperature reading is different to the showering
temperature, follow the steps 1 - 3 on page 62.
Technical Hotline
0 870 7701975
E-mail
Technical@hansgrohe.co.uk
75