Smart Technologies Board 7000 Series Installation And Maintenance Manual page 27

Chapter 2
Installing the display
Use M8 bolts (not included) to fasten the wall bracket.
l
Bolt length
Fasten force
NOTE
SMART recommends M8 × 30 mm mounting bolts for standard installations where the total wall
mount bracket and washer thickness is less than 7 mm.
Because the receptacles might not be easily accessible after you mount the display, consider
l
connecting cables for power, room computer and other devices while the display is still in its
packaging (see Chapter 3: Connecting power and devices on page 30).
smarttech.com/kb/171164
12 mm + x mm < M8 < 45 mm + x mm
where x is the combined thickness of the wall bracket and washer
97.36–177.01 in-lb. (11–20 N·m)
CAUTION
Do not over-tighten the bolts.
27