Changing The Scanning Mode - JVC NX-T5 Instructions Manual

Changing the Scanning Mode

Select the video signal output according to
the type of your TV after connecting the main
unit to the TV with an HDMI cable.
• Turn on the System before setting the scanning mode.
See page 15.
• You don't need to make this setting when you connect
the TV with a composite video cord.
1
Select DVD/CD as the source.
2
Enter the scanning mode setting.
• Finish the following process while the setting item is
flashing.
13
3
INFO
Remote
ONLY
4
Select the scanning mode.
AUTO
576P
720P
1080I
1080P
Normally select this.
AUTO
Select a scanning mode when it is
576P
720P needed.
1080I • Available settings vary according
1080P to the available resolutions of the
connected TV.
Store the setting.