Electrical / Refrigeration; Merchandiser Electrical Data; Field Wiring; Electrical Connections - Hussmann microSC SHM-A Series Installation & Operation Manual

Medium temperature self contained horizontal merchandiser with r-290 refrigerant

Hide thumbs

Table Of Contents

Table of Contents

P/N 3104942_B

MERCHANDISER ELECTRICAL DATA

Refer to separately shipped case data sheet or

the case's serial plate for electrical information.

FIELD WIRING

Field wiring must be sized for component

amperes stamped on the serial plate. Actual

ampere draw may be less than specified.

ALWAYS CHECK THE SERIAL PLATE FOR

COMPONENT AMPERES

ELECTRICAL CONNECTIONS

All wiring must be in compliance with NEC

and local codes. All electrical connections (for

remote models) are to be made in the electrical

Handy Box located behind the removable base

panel at the left end of the merchandiser when

facing the discharge air louver.

ELECTRICAL OUTLET

Before the merchandiser is connected to any

wall circuit, use a voltmeter to check that the

outlet is at 100% of the rated voltage. The wall

circuit must be dedicated for the merchandiser.

Failure to do so voids the warranty. Do not

use an extension cord. Never plug in more

than one merchandiser per electrical circuit.

• Always use a dedicated circuit with the

amperage stated on the unit.

• Plug into an outlet designed for the plug.

• Do not overload the circuit

• Do not use long or thin extension cords.

Never use adapters.

• If in doubt, call an electrician.

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.