Charging The Remote Control; Firmware Update - Pandora Camper Pro Manual

Charging a remote control
• Battery is charged
• Battery is discharged
There is battery charge level indication on the display of the remote control. Charge the battery if
the remote control doesn't turn on or the charge indicator displays low level. Charging is performed
using a standard micro-USB cable.

Firmware update

• Run the Pandora Alarm Studio application on a PC and connect a USB-cable to it.
• Press and hold the
remote control and the app will enter boot mode.
• Upload firmware, disconnect the USB-cable after completion of the procedure.
!
noTe! T
he alarmsTudio applicaTion is provided only To auThorized insTallers of pandora
-
web siTe pandorainfo
20
button and connect a USB cable. Release the button after connection. The
.
com
SECURITY-SERVICE SYSTEM PANDORA CAMPER PRO
micro-USB connector
for charging
and updating rmware
.
iT is available on our