Table of Contents
Advertisement
Quick Links
Pandora is a brand of Russian Experimental Engineering Factory, a full production cycle
electronics R&D facility. We design and produce car service-security systems for more than 10 years
and have reached a considerable success on domestic markets – biggest security system markets in
the world. Our systems are made to withstand severe weather conditions and criminal situation of
northern Eurasia.
Pandora DXL-0090L is a premium car service-security system, built for cars with on-board
voltage of 12V. It is a complex engineering solution which includes car security system, telemetry,
remote and automatic engine start and various service options, all accessible via RF control remote
that can replace your factory remote. This system is designed to be all-in-one car service and security
solution and requires no additional modules: it includes algorithmic keyless bypass that works with
many popular car models. For even more convenience, it allows remote control over Webasto or
Eberspaecher preheaters – and even sequential use for automatic engine start.
WARNING!
IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR MECHANIC INSTALLING
THE SYSTEM. CERTIFIED INSTALLERS ARE RARE OUTSIDE RUSSIA, BUT ANY CAR
ELECTRONICS INSTALLER SHOULD BE ABLE TO INSTALL PANDORA DXL-0090L
USING INSTALLATION SCHEME IN THIS MANUAL AND ALARMSTUDIO SOFTWARE.
MOST FEATURES ARE HIGHLY DEPENDENT ON COMPETENT INSTALLATION.
OUR SYSTEMS ARE THOROUGHLY TESTED FOR QUALITY, SO IF A FEATURE FAILS
TO PRODUCE EXPECTED RESULTS, MOST LIKELY THE PROBLEM IS IN IMPROPER
INSTALLATION.
It is essential for systems functioning that you read and understand instructions in this manual.
Note that all radio devices are subject to interference, which could affect proper performance.
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in
temperatures outside -40 to +80
C range.
o
IMPORTANT! Note that this manual describes remote and manual functions for the
most part. Functionality of the system is vast and would require a book-sized manual to
fully describe. Instead we use a handy software named AlarmStudio that functions as both
programming tool and an extended installation & functionality manual. It requires Windows
and can be downloaded at pandorainfo.com
Pandora would like to thank you for choosing
our DXL-0090L service and security system
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
Advertisement
Table of Contents
Related Manuals for Pandora DXL-0090L
Summary of Contents for Pandora DXL-0090L
- Page 1 Our systems are made to withstand severe weather conditions and criminal situation of northern Eurasia. Pandora DXL-0090L is a premium car service-security system, built for cars with on-board voltage of 12V. It is a complex engineering solution which includes car security system, telemetry, remote and automatic engine start and various service options, all accessible via RF control remote that can replace your factory remote.
-
Page 2: Table Of Contents
Shock sensor settings Motion sensor settings Tilt sensor settings Siren signal settings Sound notification settings Radio channel control settings Maintenance/valet mode Time settings Alarm settings Checking the number of recorded remotes Replacing a battery in the remote Pandora DXL-0090L service-security system... - Page 3 Changing the factory preset service PIN-code Changing core settings Siren sounds and turn light signals Meaning of indicator LED colors Glossary of terms Warranty obligations Installation certificate Acceptance certificate Warranty card User manual...
-
Page 4: System Features
• Automatic arming. • Registers delay for interior lighting when arming. • Software updates via built-in micro-USB socket. * Engine temperature indication is available only if temperature sensor is connected. The sensor availability depends on the system set. Pandora DXL-0090L service-security system... -
Page 5: System Set
Car security zones Pandora DXL-0090L service-security system guards following independent zones with corresponding zone notifications on the remote and recording alarms into the event history: • car doors perimeter (separate for every door) • front hood triggers • trunk triggers •... -
Page 6: Control Remotes
ALL CONTROL COMMANDS ARE TRANSMITTED VIA RADIO CHANNEL, FOR MAXI- MUM EFFECTIVENESS AND RANGE IT IS RECOMMENDED NOT TO SHIELD AERIAL AREA (SEE PICTURE) WITH FINGERS WHEN USING A REMOTE. WARNING! REMOTE IS A UNIFIED CONTROL DEVICE. REMOTE CONTROL FUNCTIONS DEPEND ON SECURITY SYSTEM MODEL. Pandora DXL-0090L service-security system... -
Page 7: Led Indicator Signals
LED indicator signals Green Send indicator • Flashes occasionally if there is a connection. • Goes dark when there is no connection. Red Alarm indicator • Flashes frequently if there is any notification. • Flashes occasionally when there is no connection. Quick access functions of the main control remote System disarmed System armed... -
Page 8: Icons Of Remote
(Hands Free mode) without (1 sec.) confirmation sound notification Icons of remote 12 48 Flashing when command Numeric indicator. Displays sending current time Security mode status Battery voltage 12 ° Remote battery level Interior temperature Pandora DXL-0090L service-security system... - Page 9 0° Engine temperature* Front hood security zone Fuel level* Trunk security zone Alarm clock Ignition security zone Shock sensor security zone Handbrake/neutral indicator, - Warning level of the sensor Brake pedal security zone - Alarm level of the sensor Car battery voltage, voltage Tilt sensor security zone security zone Motion sensor security zone...
-
Page 10: Arming Procedure
To disarm the system, shortly press button on the remote. You will hear 2 short siren sounds and will see 2 flashes of turn signals. The remote will play ‘DISARMING’ ringtone and security mode status icon will change to: Pandora DXL-0090L service-security system... -
Page 11: Control Over System In Case Of Emergency
For disarming without sound confirmation press button for more than 1 second. If there were new alarming events during the time system was armed, siren will sound 4 times, and turn signals will flash 4 times, the remote will sound ‘WARNING!’ ringtone (after ‘DISARMING’ ringtone) and will indicate zones triggered. -
Page 12: Unlocking The Trunk
Locking/unlocking doors when the engine is running The system controls doors locking when the engine is running. To lock doors, shortly press arming button, to unlock doors, press disarming button. doors locking short press doors unlocking Pandora DXL-0090L service-security system... -
Page 13: Car Search Function
There is an automatic movement lock mode that will lock the doors at the car movement and will unlock them when the ignition is being switched off. Immediately after the ignition is switched off, doors will be unlocked. When using doors locking mode at the car’s movement start, the system will fix car moving and perform doors locking (it depends on motion sensor sensitivity settings). -
Page 14: Panic Mode
To compensate, motion sensor sensitivity, responsiveness and range will be increased. If any security zone will be triggered, the engine will be immediately stopped and alarm mode will be entered. Herewith all immobilizer functions will be activated. Pandora DXL-0090L service-security system... - Page 15 Programmable neutral procedure (for cars with manual transmission) xate the car using a handbrake leave the car, close the doors in 3 sec. the engine will be ‘engine stop’ stopped, the system is ready ringtone to perform remote start short press If you are planning to use remote and automatic engine start on a car with manual transmission, before arming you will need to perform following actions: 1.
- Page 16 ‘ENGINE STOP IN 1 MINUTE’ ringtone will play every 10 seconds. If the engine was started using remote or automatic start, remote engine start command will extend its operation period by 10 minutes. This procedure can be repeated multiple times. Pandora DXL-0090L service-security system...
-
Page 17: System Settings Menu
adjusting shock sensor alarm.lvl.= adjusting shock sensor alarm.lvl.= adjusting shock sensor System settings menu warn.lvl.= remote start adjusting Enter the main menu with button settings shock sensor short press. To switch between menu sections, warn.lvl.= shortly press button. add. sensor 12 48 enabled Remote and automatic engine start adjusting... - Page 18 Exit settings menu antihijack 14 45 enabled To exit menu, press and hold button for 1 second connect. lost: Antihijack mode* * The function is not available in this model sounds alarm 06 30 antihijack: Pandora DXL-0090L service-security system disabled...
-
Page 19: Engine Preheater
Timer channels Timer channels (see glossary) can be used to implement additional functions and to control external devices. Timer channels can be adjusted via special piece of software – Pandora AlarmStudio. AlarmStudio can be downloaded from the official company web-site pandorainfo.com To enter Timer channels menu, shortly press button. - Page 20 1 disabled enabled enabled channel 4 channel 4 channel 1 enabled disabled enabled channel 1 enabled channel 1 channel 2 enabled enabled channel 1 channel 2 enabled Pandora DXL-0090L service-security system enabled channel 2 enabled channel 2 channel 3...
-
Page 21: Car Status Control
system Car status control controls CHECK To receive information about engine, interior temperature, battery voltage and fuel level, select System controls menu and shortly press button. To exit menu, press and hold button for 1 second. system 12 0V 24° 27°... -
Page 22: Automatic Engine Start
NOTE: Engine start via temperature is available only if temperature sensor is connected. The sensor availability depends on the system set. WARNING! ONLY ENABLE REMOTE START IF YOUR LOCAL LEGISLATION ALLOWS DRIVERLESS CARS TO HAVE WORKING ENGINE. Pandora DXL-0090L service-security system... - Page 23 remote remote start settings start settings remote remote start start settings remote start start settings by time: start settings by time: enabled enabled remote start remote start start settings by time: start start start settings by time: start enabled by time: by time: by time: enabled...
-
Page 24: Wiring Diagram
868 MHz X-6 LED indicator X-5 Relay module Blue Orange Brown Green Yellow X-4 Main socket White Red/Black Orange/White Yellow/White Grey Green Blue/White Black Blue Brown/White Orange/Black Yellow/Black Blue/Black Yellow Purple X-2 micro-USB Pandora X-3 Temperature sensor... - Page 25 MODEL: DXL OO9OL ypass IMMO KEY1 IMMO KEY2 INDICATOR Fuse 40A Yellow ay module Brown Blue OUT 7 • ENGINE BLOCK (–) Orange OUT 6 • ACCESSORIES Orange (–) Green RELAY MODULE OUT 9 • IGNITION Brown (–) RMD-5 Green/Red OUT 8 •...
- Page 26 80° settings 80° settings return to the beginning of the settings stop stop temperature: send send temperature: settings settings 80° 80° Pandora DXL-0090L service-security system send send settings settings...
-
Page 27: Wiring Description
Wiring description X-4 socket (main) Wire 1 (White) (tachometer input) It is analog input that should be connected to wire of tachometer or signal wire of injector, a wire with stable impulses of any polarity that correspond with motor shaft rotation frequency. Wire 2 (Red-black) (OUT-5/INP-7) Factory setting is ‘Open trunk’... - Page 28 (it becomes grounded when switching on the ignition and security system is not armed). A negative output of additional channel with maximum load capacity 200mA. This output is multipurpose, it can operate as input or output in accordance with selected logic. Pandora DXL-0090L service-security system...
- Page 29 Wire 2 (Orange) (OUT-6) Factory setting is ‘Accessories’ . The channel is used to control accessories. If ‘Car with START/STOP button’ setting is enabled, the channel will control brake pedal during remote or automatic engine start. A negative output of additional channel with maximum load capacity 200mA.
-
Page 30: Shock Sensor Settings
To exit menu, press and hold button for 1 second. warn. level shock sensor shock sensor warn. level warn. level shock sensor alarm level shock sensor Pandora DXL-0090L service-security system shock sensor enabled alarm level alarm level enabled enabled... -
Page 31: Motion Sensor Settings
enabled warn. level adjusting shock sensor shock sensor alarm.lvl.= alarm level enabled increase decrease adjusting shock sensor shock sensor warn. level warn.lvl.= enabled press and add. sensor adjusting hold 3 sec. to save, press enabled shock sensor and hold 1 sec. alarm.lvl.= increase decrease... -
Page 32: Tilt Sensor Settings
Siren signal settings To configure siren sounds, select Siren settings menu. Select one of three siren sound options using button. To save new settings, shortly press button. To exit menu, press and hold button for 1 second. Pandora DXL-0090L service-security system... -
Page 33: Sound Notification Settings
siren settings siren all sound signals are disabled settings siren settings siren settings siren warning signals are disabled settings siren settings siren settings siren settings siren warning and alarm signals are disabled settings sounds disabled sounds shortly press to save disabled sounds disabled... -
Page 34: Radio Channel Control Settings
‘Connection lost’ sound notification connect. lost: connect. lost: connect. lost: alarm alarm alarm signal alarm connect. lost: connect. lost: connect. lost: all notifications are disabled no sound no sound no sound Pandora DXL-0090L service-security system... -
Page 35: Maintenance/Valet Mode
Maintenance/valet mode valet It is recommended to put system into maintenance mode before handing it to the car service or valet parking. When this mode is switched on, security system stops interfering with built-in electron- mode ics and disables all functions to ease maintenance or parking. Moreover, you will not have to leave the remote to the valet or the mechanic. -
Page 36: Alarm Settings
To replace the battery: • move battery cover lock in the direction shown with arrow; • take the battery out and place a new one on its place; Pandora DXL-0090L service-security system... -
Page 37: Changing The Factory Preset Service Pin-Code
• the remote is ready for use (switch it on by pressing and holding for 3 seconds). It is recommended to keep an extra AAA battery in the car. Changing the factory preset service PIN-code To improve the protection of the system, we recommend you to change service PIN-code. 1. -
Page 38: Changing Core Settings
If base unit has not yet been installed in the vehicle, it should be powered via micro-USB cable while programming. To program using a computer connected via cable, you need a standard micro-USB cable, a computer with Windows and a special piece of software – Pandora AlarmStudio. In preparation to the programming, following stages should be followed: –... - Page 39 Entering programming menu, PIN-code input: 1. Disarm the system, switch off the ignition. 2. Connect the base unit of the system to a computer via micro-USB cable (X-2 socket). 3. Using VALET button, input service PIN-code. Factory preset PIN-code is 1-1-1-1. 4.
- Page 40 To reset to the factory settings, you need to enter fourth programming level, then press and hold VALET button for 3 seconds until siren sound. Once VALET button is released, the status indicator will confirm a successful reset to factory settings with a long red flash. Pandora DXL-0090L service-security system...
- Page 41 Fuel level definition is performed with connecting of INP-5 input, factory setting is ‘brake pedal trigger’. Setting is performed via Pandora AlarmStudio. ‘Use INP-5 to control fuel level’ item should be enabled in the settings, the factory setting (input setting) should be changed.
- Page 42 To exit the programming mode, enter sublevel 12 or press VALET button more than 12 times. To reset all calibration values, proceed to sublevel 11 (do not switch off the ignition). Pandora DXL-0090L service-security system...
- Page 43 Reset confirmation is performed by pressing of button, exit without confirmation and exit the menu are performed by pressing VALET button. Level 17 – Setting up keyless bypass of built-in immobilizer This level enters programming mode to teach algorithmic keyless bypass of built-in immobilizer. LED indicator will be lit green when on this level.
-
Page 44: Siren Sounds And Turn Light Signals
The system is preparing for automatic arming Orange flash Confirms VALET button press Orange flashes Confirms a number of recorded remotes (when switching on ignition) Red and green flashes PIN-code confirmed Faded The system is disarmed Pandora DXL-0090L service-security system... -
Page 45: Glossary Of Terms
Glossary of terms AlarmStudio – an installation helper software that is to be installed on a Windows PC (preferably, laptop). AlarmStudio allows changing any parameters in the system and provides installation tips for particular cars. Easy to use and intuitive, AlarmStudio is required for in-depth and highly customized installation. -
Page 46: Warranty Obligations
Packaged products should be stored on racks in piles of 6 or less boxes, in enclosed, dry, heated rooms (no less than 1m from heating) which exclude possible interaction with moisture, oil products and damaging environmental factors. Pandora DXL-0090L service-security system... -
Page 47: Installation Certificate
Car specifications: Car model _________________________________________________________________________________ Type ______________________________________________________________________________________ ID number (VIN) ____________________________________________________________________________ Registration number ________________________________________________________________________ Security system specifications: Model Pandora DXL-0090L Serial number ______________________________________________________________________________ Service center name, full address and installer’s stamp ____________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ Signature_____________________/___________________________________/ Signator... -
Page 48: Acceptance Certificate
Acceptance certificate Pandora DXL-0090L is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC Serial number ______________________________________________ Date of production _________________________________________________ Responsible person’s signature (stamp) Packager ___________________________________________________ Signature (personal stamp) Warranty card Model Pandora DXL-0090L Serial number ______________________________________________ Date of purchase «____»...
Need help?
Do you have a question about the DXL-0090L and is the answer not in the manual?
Questions and answers