Page 2
TILLYKKE De har købt et ANDERSEN spil af høj kvalitet. Dette produkt er et resultat af mange års udviklingsarbejde samt erfaring indenfor produktion af spil til sejlbåde. Med dette spil får De funktionalisme på højt plan med henblik på at yde Dem en behagelig samt sikker sejlads.
Pawl arm springs should be replaced every second year. Spare arm springs and other parts that may be required are included in the ANDERSEN Service Kit. Please refer to the service instruction for the Service Kit suitable for the specific winch.
INSTALLATION 52ST ver. 2.5 – 52ST FS ver. 2.5 Installing the winch is easy, if you follow these instructions. The numbers in ( ) refer to the position numbers in the parts list. Tools required for the installation. Allen key (4 mm).
Page 5
Assemble in reverse order. During assembly, by the use of a small soft brush lightly grease all gear teeth, drive shaft, roller bearing, shafts, balls, pawls, springs and composite bushings. Pawls should only be lubricated with a very thin film of ANDERSEN WINCH GREASE. It is very important that pawls can move freely.
PARTS LIST 52ST ver. 2.5 – 52ST FS ver. 2.5 POS. QTY. DESCRIPTION PART. NO. Screw ISO 7380-A4-M6x16 Self-tailing arm 594100 Circlip 591000U Self-tailing top Model ST 540405 Self-tailing top Model ST FS 540411 Circlip 591000U Screws 585160 Disc Model ST (only for 540405)
ANDERSEN issue a three-year warranty on all their products covering manufacturing and material defects on condition that the products are used in normal fashion. The warranty shall apply for three years from the moment ANDERSEN sell the product concerned (to the first buyer).
Need help?
Do you have a question about the 52ST and is the answer not in the manual?
Questions and answers