UAD settings
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings.
Navigate to Settings:UAD.
Make sure Htek UAD is enabled. To check the UAD status click on the edit icon corresponding
to your Htek phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating Extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select Htek phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
Extension values
Enter values into the required field text boxes.
Need help?
Do you have a question about the UC923 and is the answer not in the manual?